端头封边机和普通封边机区别

秋水天长

设备特点 Features
  01辅助进料装置 Feeding support device
   
  02窄板封边 Narrow  panel edging
   
  可封短边40mm宽度板材
  Processing 40mm panel
  03上熔胶系统 Top gluing system
   
  熔胶盒接近预熔胶
  胶量控制更准确
  Glue pot close to pre-melt
  glue amount control more accurate
  04自动加胶功能 Auto Adding Glue
   
  05五轮压贴机构 5 wheels pressing unit
   
  装有独立电机，由1个大压轮和4个小压轮组成
  有效压紧，加强封边带与工件之间的粘合
  轮子上带有刮刀机构，防止胶水粘、堵在压贴轮表面
  Equipes with independent motor, composes with 1 large wheel and 4 small ones, which effectively press tightly on workpiece.thus to strengthen the adhensiveness between edge tape and workpiece. Pressing wheels equiped with glue scrapper to prevent gluesticking on surface
  06烤灯装置 Heating Lamp  Device
   
  遇板加热，降低能耗及生产成本、提高封边效果
  Heating workpiece to lower product cost, and to improve
  edge banding effect
  07齐头机构 Rail endcutting
   
  采用宽型直线导轨结构前后切装置，强度高、精度可靠
  使用高频马达与锋利锯片，快速、精准修边
  节省材料，齐头导轨带自动润滑系统
  Equipe with linear guide structure for end cutting device,
  more stronger  and more accuracy ;
  Applies with high frequency motor and cutters,
  faster&precised in trimming, save in material ,
  guide rails equipes with auto lubrication
  08气动精修  Pneumatic fine trim
   
  根根据封边带厚薄自动切换
  用于修去加工板材封边条上下多余的封边材料
  保证修边的板材上下部分的平整光滑
  auto change according to thickness of edge tape.  
  used to scrap off the excess edge tape at top and bottom,
  assuriang a flat and smooth surface.
  09气动双刮边  Pneumatic double scraping
   
  可使已修边部份变得光滑和完美视觉效果
  Assures for a smooth and perfect effect on edge banding
  10平刮边机构 Flat scraping unit
   
  去除多余胶线，提高封边质量
  Scrapping off the visuable glue line，
  to make surface more smooth beautiful
  11往复式抛光 Reciprocating buffing
   
  
  使木板封边后更加干净光滑
  to make surface more smooth beautiful
  设备配置 Configurations
   
  01气动控制系统 Pneumatic Control System
   
  采用气动控制方式，可根据不同厚度
  的封边带自动调节(触屏选择)，提高生产效率
  Automatically change between 4 different
  kinds of edge thickness from the HMI,  more efficiency
  02压梁自动定位 Automatic Pressure beam
   
  自动压梁升降置于压梁的尾部
  Auto lifting system  places at the end of pressure beam
  03脱膜机构、清洁机构 Spray Unit、Clean Unit
   
  脱模机构：
  隔离木板上下表面胶水
  清洁机构：
  清除残余胶，保持板面清洁
  Spray Unit:
  Isolated the glue on the surface of the panel
  in upand bottom side
  Clean Unit:
  Clear the residual glue  Keep panel clean
  主要技术参数 Main technical data
     
  应用配套 Application
   
  可适应中等批量混单式生产
  操作简便轻松、工厂布局运转灵活